Detection method | Identification of color ratios and brightness through R/G/B light receptive elements |
---|---|
Detection distance | Depends on the use environment |
Standard detection target | Light source emitting visible lights |
Power Supply | 12 to 24 V DC ±10%, Ripple 10% or less |
Current consumption | 1000mW or less (40mA or less) at 24V DC |
Reference color registration | Via teaching: 1 color |
Reference color setting | 1-point teaching / 2-point teaching |
External input/output | 1 input, 2 outputs (Output 1: color ratio identification output, Output 2: brightness identification output) |
External teaching input | No-voltage input (With or without contact point) |
Output mode | NPN/PNP open collector output (operation switch) Load current: 50mA (30V DC) or less, Residual voltage: 2V or less |
Operation mode | Switch “Match ON”/“Match OFF”with the reference color |
Timer | ON Delay / OFF Delay / One Shot / No timer Delay time: 1 to 999 ms (setting available in an interval of 1ms) |
Response time | Auto (10 ms or less at maximum, depending on the illumination conditions of the workpiece) / 50 ms or less / 100 ms or less / 250 ms or less / 500 ms or less (selectable) |
Indicators | Operation indicator, Setting indicator,Match ON (NO) and Match OFF (NC) Indicator: Orange LED |
Display | Tolerance value display: Green LED, 4-digit/ Maximum difference display of color ratios: Red LED, 4-digit |
Protection circuit | Protection against power reversed connection and output short-circuit |
Material | Polycarbonate |
Connection method | Attached cable type (φ4.2 mm2 o.d.) 0.2 mm2 x 5-core, 2m |
Accessories | Instruction manual |
Ambient temperature | -25 to +55℃ at storage (no freezing) |
---|---|
Ambient humidity | 30 to 85 % RH (no condensation) |
Protection structure | IP40 |
Anti-vibration | 10 to 55 Hz, double amplitude 1.5 ㎜, X, Y, Z directions, 2 hour each |
Shock | 500m/s2, 3 times each in X, Y and Z directions |
Dielectric withstand voltage | 1000V AC for 1 minute |
Insulation resistance | 20MΩ or more with 500V DC Megger |