| Detecting distance | 3-50mm *1 |
|---|---|
| Detection object | 100x100mm white paper |
| Thread size | M6x0.75 |
| Power supply | 12-24VDC±10% ripple 10% or less |
| Current sonsunp | 20mA or less |
| Output mode | Open collector output Rating : source current 80mA (DC 30V) or less |
| Operation mode | Light on |
| Response time | 0.5ms or less |
| Light source | Infrared LED (870nm) |
| Indicator | Operation : orange LED, Stability : green LED |
| Sensitivity adjustment | SENS.VR *1 |
| Short circuit protection | Built-in |
| Material | Case, Nut and Wassher : SUS303, Lens : Polysuliopne |
| Connection | 0.15 mm2 x 3 cores |
| Mass | 30g |
| Accessory | Instruction manual, Nut, Washer, Screw driver |
*1 Maximum torque specification on sensivity Pot of 8mN,m (use supplied screwdriver)
*2 The detecting distance of the diffuse reflective type varies, depending on transparency of the detection object. Please be sure to check detection beforehand.
| Ambient light | 3,000lx or less |
|---|---|
| Ambient temperature | -25 to + 55℃ (non-freezing) storage : -30 to +70℃ (non-freezing) |
| Ambien humidity | 35 to 85%RH (non-condensing) |
| Protective strucure | IP67 |
| Vibration | 10 o 55Hz/1.5mm double amplitude, 2 hours in X,Y,Z direction for each |
| Shock | 500m/s2 3 times each in 3 directions |
| Dielectric withsanding | 500VAC for 1minute |
| Insulaion resistance | 500VDC, 20M ohms or higher |