| Detection method | Through beam |
|---|---|
| Detecting distance | 500 mm |
| Detection object | dia.3mm (or more) Opaque |
| Power supply | 24VDC±10% / Ripple 10% or less |
| Current consumption | Transmitter : 15mA or less Receiver : 22mA or less |
| Output mode | NPN open collector Rating: sink current 80mA (30 VDC) or less |
| Operation mode | (See the Type table in the previous page) |
| Response time | 0.5ms or less |
| Light source | Red LED |
| Indicator | Transmitter: - Receiver: Operation indicator (red LED), Stability indicator (green LED) |
| Sensitivity adjustment * | in-line volume |
| Material | Case : Liquid crystalline polyester (filler: polypropylene) Lens : PMMA |
| Connection | Attached cable 2m Transmitter：0.15mm2×2 core (Gray), dia φ2.5mm Receiver：0.15mm2×3core (Black), dia φ2.7mm |
| Weight | Transmitter : Approx. 30g Receiver : Approx. 30g |
| Notes | * The distance between the sensor and the in-line volume for sensitivity adjustment is fixed to 300mm. |
| Accessory | Instruction manual, screws(M12×10mm), nuts, washers and a screwdriver for adjustment (for models which model number ends with "V") |
| Ambient light | 3,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) |
| Ambient humidity | 35-85%RH (non-condensing) |
| Protective structure | IP64 |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Sock | 500m/S2 3 times each in 3 directions |
| Dielectric withstanding | 1000VAC 1minuts |
| Insulation resistance | DC500V Megger 20MΩ or higher |