Detection method | Through beam |
---|---|
Detecting distance | 2-30mm (50x50mm white drawing paper) |
Detection object | Opaque, translucent, transparent |
Power supply | 12-24V DC±10% / Ripple 10% or less |
Current consumption | Transmitter : 15mA or less Receiver : 15mA or less |
Output mode | NPN open collector Rating: sink current 80mA (30 VDC) or less |
Operation mode | (See the Type table in the previous page) |
Response time | 0.5ms or less |
Light source (light wavelength) | Infrared |
Indicator | Transmitter: - Receiver: Operation indicator (red LED), Stability indicator (green LED) |
Material | Case : LCP (filler: PP) Lens : PC |
Connection | Attached cable (dia. 2.5) Transmitter: 0.15 mm2 x 2 cores 2m (gray) Receiver: 0.15 mm2 x 3 cores 2m (black) |
Weight | Transmitter : Approx. 30g Receiver : Approx. 30g |
Notes | * The distance between the sensor and the in-line volume for sensitivity adjustment is fixed to 300mm. |
Accessory | Instruction manual, screw(M2.6×12mm),nuts and washers |
Ambient light | 3,000 lx or less |
---|---|
Ambient temperature | -25 - +55 ℃ (non-freezing) |
Ambient humidity | 35-85%RH (non-condensing) |
Protective structure | IP64 |
Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |