| Detection method | Convergent reflective sensor for glass detection |
|---|---|
| Detection object | Transparen glass |
| Detecting distance | Transparen glass 3 - 15mm 18mm or less.(*) |
| Power supply | 12-24V DC ±10% / Ripple 10% or less |
| Light source | 2 red LEDs |
| Current consumption | 25mA or less, 30mA or less (*1) |
| Operation mode | Light ON |
| Output mode | NPN open collector output: Slink current 50 mA (30 VDC or less) |
| Short circuit protection | Privided |
| Indicator | Operation indicator : orange LED |
| Response time | 0.5ms or less |
| Material | Case : Polybutylene terephthalate Window : Polybutylene terephthalate |
| Connection | Attached cable (Outer dimension: dia. 2.7mm, 0.15mm2 3cores 2m) |
| Weight | Approx. 30g |
| Accessory | Operation manual |
The detecting distance is the range which you can set for the reflector. The sensor can detect an object even in extremely short range. (*) The maximum distance means the distance to the farthest part of an inclined transparent glass. This sensor does not have a sensitivity adjustment volume and must be used with no object interfering with the detection in the surrounding area. (*1) ASG-S20RV縲、SG-Z15RV
| Ambient light | 5,000 lx or less |
|---|---|
| Ambient temperature | -10 - +55 ℃ (non-freezing) |
| Ambient humidity | 35-85%RH (non-condensing) |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
| Protective structure | IP40 |