ASW-SG625AP

Rating/Performance/Specification

Applicable Wafer 6 inch transmittance: 30% or less
Number of channels 25ch
Wafer pitch 4.76mm
Detection method Through beam
Comb Replaceable
Power supply DC24V ±10% ripple 10% or less
Current consumption 250mA or less
Operation mode Dark ON
ON/OFF when trouble
Output mode NPN open collector
Rating: sink current 30VDC or less, 30mA or less
Response time 10ms or less
Light source Infrared LED (830nm)
Light emission
inhibit input / re-teaching
(self diagnosis function)
Open collector input or contact input Light emission inhibit ON: 1.5V or less OFF: 4V or more
Light emission inhibit at ON
Re-teaching at OFF.
Output inhibit input Open collector or contact input
Output inhibit ON: 1.5V or less OFF: 4V or more
Connection Attached cable with connector (Fujitsu FCN-361J040-AU)
Cable length: 3m
Material Sensor unit : Polycarnonate
Housing : Aluminum
Mass Approx. 330g
Accessories Operation manual

Environmental Specification

Ambient temperature -10 to +55℃(non-freezing)
Ambient humidty 35 to 85%RH (non-condensation)
Protective structure IP40
Ambient illumination 1500 lx or less
Vibration 10-55Hz double amplitude 0.5mm X, Y, Z directions, 2 hours each
Shock 300m/s2 X, Y, Z directions, 3 times each