Applicable Wafer | 8 inch normal mode: transmittance: 30% or less latch mode: transmittance:70% or less |
---|---|
Number of channels | 26ch |
Wafer pitch | 6.35mm |
Detection method | Through beam |
Comb | Replaceable |
Power supply | DC24V ±10% ripple 10% or less |
Current consumption | 1.8W or less |
Operation mode | Dark ON Normal mode / Latch mode selectable(with switch) ON/OFF when trouble |
Output mode | NPN open collector Rating : sink current 30VDC or less, 20mA or less |
Response time | 12ms or less |
Light source | Infrared LED (830nm) |
Light emission inhibit input / re-teaching (self diagnosis function) |
Open collector input or contact input Light emission inhibit ON: 1.5V or less OFF: 4V or more Normal mode : Light emission inhibit at ON. Re-teaching at OFF. Latch mode : Reset the latch output and inhibit light emission at ON. Re-teaching at OFF. |
Output inhibit input | Open collector or contact input Output inhibit ON: 1.5V or less OFF: 4V or mor |
Connection | Attached cable with connector (Fujitsu FCN-361J040-AU) Cable length : 3m |
Material | Sensor unit : Polycarnonate Housing : Aluminum |
Mass | Approx. 400g |
Accessories | Operation manual |
Ambient temperature | -10 to +55℃ (non-freezing) |
---|---|
Ambient humidty | 35 to 85%RH (non-condensation) |
Protective structure | IP40 |
Ambient illumination | 1500 lx or less |
Vibration | 10 to 55Hz double amplitude 0.5mm X, Y, Z directions, 2 hours each |
Shock | 300m/s2 X, Y, Z directions, 3 times each |