Detection method | Through beam |
---|---|
Detection distance | Parallel beam mode: 0-4m Cross beam mode: 0.5-4m |
Detection target | Parallel beam mode: Opaque φ25㎜ or more Cross beam mode: Opaque φ15㎜ or more |
Optical axis interval | 20mm |
Number of optical axes | 13 |
Detecting width | 240mm |
Power supply | 12-24VDC ±10%, Ripple 10% |
Power consumption | 80mA or less |
Output mode | NPN/PNP Open collector output (Output selectable) Load current: 50mA (30VDC) or less Residual voltage: 2V or less |
Operation mode | Light ON: Activated when beams of all optical axes are received (Deactivated when a beam of any optical axis is blocked). |
Response time | Parallel beam mode: 20ms or less when light blocked, 30ms or less if when light received. Cross beam mode: 30ms or less when light blocked, 50ms or less if when light received. |
Light source (wavelength) | Infrared LED (850nm) |
Light receiving element | Photo IC |
Indicators | Transmitter: Power Indicator (Green), Slave Indicator/Cross beam Indicator (Blue), Cross beam Indicator (Blue) Receiver: Power Indicator/Light reception stability Indicator (Green), Operation Indicator (Orange) |
Auxiliary functions | Automatic sensitivity compensation, Mutual interference prevention for close proximity installations (Up to 2 sets in Parallel beam mode), Reverse polarity protection, Short-circuit protection |
Protection Material | Case: Aluminum, Front cover: Poly carbonate, Mounting part: Zinc alloy die casting |
Connection | Attached cable φ3.5㎜, 3m Transmitter: 0.15㎜2 × 4 cores (Gray), Receiver: 0.15㎜2 × 5 cores (Black) |
Weight | Transmitter Approx. 170g Receiver Approx. 180g |
Accessories | Instruction Manual, small 3-point SEMS screw M4 |
Ambient light | 10,000 lux or less |
---|---|
Ambient temperature | -10 ºC to +55 ºC (No freezing) |
Ambient humidity | 35 to 85 % RH (No corrosion) |
Protective structure | IP 65 |
Vibration | 10 Hz to 55 Hz, 1.5㎜ double amplitude, 2 hours each in 3 directions (X, Y, Z) |
Shock | 300 m/s2, 3 directions (X, Y, Z), three times for each axis |
Dielectric withstand voltage | 1000 VAC, 1 minute |
Insulation resistance | 500 VDC, 20 MΩ |
◦ The product is equipped with a noise filter between the case and the charger section to avoid malfunctions caused by noise. Accordingly, the maximum breakdown voltage rating and the insulation resistance in the above specifications show the values without the noise filter.