Home > Products Info > Photo Sensors with Built-in Amplifier > CN-T100MR
| CN-T100MR | GKM (oil) | GKM (water) | GKM (PET) | UX | ASG | GN-C | UM | UM side-on | Mini-G | VS-S | GA |
| Middle-G | NT30F | CX | DLZ | GM | LD-M/S | LD-MX5R | PF | GA-MT1R | NE-DC | NEF |
CN-T100MR
CN-T100MR
 
  • High-powered light transmission capable of withstanding adverse environmental conditions.
  • 3-point level indicator with margin for reliable detection.
  • The M30 metal housing is ideal for hard environments.
 
DIMENSIONS OUTPUT CIRCUIT DXF
Specifications
Models Set model CN-T100MR
Transmitter CN-TL100
Receiver CN-TR100MR
Detection Through beam
Range 100m
Detecting object ø24 Opaque
Power supply 48 to 240VAC ±10% 50/60Hz
24 to 240VDC±10%
Power consumption Transmitter, Receiver: each 0.5W or less
Output mode Photomos relay output 1a
Rating : AC/DC 250V 50mA or less(resistive load)
Operating mode Dark-On
Response time 10ms or less
Light source (wave length) Infrared LED (860nm)
Indicator Transmitter : Power indicator : Green LED
Receiver : Power indicator : Green LED
Operating indicator : Green LED
Level indicator : Yellow LED( 3 points)
Circuit protection Short circuit protection
Material Case BS(Ni plated), (Rear panel : U polimar)
Lens Glass
Wiring Flying lead 2m (outer dia ø6) oil resistance cable
Transmitter : 0.3sq mm x 2 cores
Receiver : 0.3sq mm x 4 cores
Weight (Max.) Transmitter, Receiver : each 300g (without cable)

ENVIRONMENTAL CHARACTERISTICS

Ambient light 5,000lx or less
Temperature range Operating : -25 to +55℃, Storage : -40 to +70℃(non freezing)
Humidity 35 to 85%RH
Enclosure rating IP67
Vibration resistance 10 to 55Hz, 1.5mm double amplitude, 2 hr. in X, Y and Z directions
Insulation resistance 100 MΩ min. at 500VDC
Shock resistance 500m/s2 3 times in X,Y and Z directions
go to page top
  Copyright © TAKENAKA ELECTRONIC INDUSTRIAL CO.,LTD. All Rights Reserved.