Home > Products Info > Photo Sensors with Built-in Amplifier > NE2-2 series
| NE2-2 | CN-T100MR | GKM (oil) | GKM (water) | GKM (PET) | UX | ASG | GN-C | UM | UM side-on | Mini-G |
| VS-S | GA | Middle-G | NT30F | CX | DLZ | GM | LD-M/S | LD-MX5R | PF | GA-MT1R | NE-DC | NEF |
NE2-2 series
NE2 series - photo
 
  • The NE2-2 series has been produced for use in as many different applications as possible for automation.
    The long detecting range enables an application for heavy industry.
    Choose between a swivel M12 connector or embedded cable.
    Two separate outputs in the same sensors – one with PNP and one with NPN. Several accessories such as angle brackets, protective covers and screening masks simplify installation.
    • Through beam type : 30m and 50m
    • Retro reflector type : 8m
    • Diffuse reflective type : 1m
    • Enclosure protection : IP67
 
DIMENSIONS OUTPUT CIRCUIT HOW TO CONNECT
Specifications
Models NPN NE2-T50-2 NE2-T30R-2 NE2-M10R-2 NE2-R10-2
NE2-T50-2 NE2-T30R-2 NE2-M10R-2 NE2-R10-2
PNP NE2-T50-J2 NE2-T30R-J2 NE2-M10R-J2 NE2-R10-J2
NE2-T50-J2 NE2-T30R-J2 NE2-M10R-J2 NE2-R10-J2
Detection Through beam type Polarized retro reflector type Diffuse reflective type
Range 50m 30m 0.05 to 8m
(used for K-7)
1m
Mini. Detecting object ø21mm Opaque object Mirror-like object, opaque object Opaque object
Power supply 12 to 24VDC10%, Ripple 10% Max.
Current consumption Trns. : 22mA (Max.)
Rcvr. : 17mA (Max.)
28mA (Max.) 25mA (Max.)
Output NPN/PNP open collector 2 outputs
Output mode NPN Rating : Sink current 100mA (DC30V) Max.
PNP Rating : Source current 100mA (DC30V) Max.
Operating mode Light-on/Dark-on selectable
Light emission stop function Provided(non-voltage input) -
Cross talk protection by using filters(for 2 sensors) - Provided (for 2 sensors)
Response time 0.5ms Max.
Hysteresis - 10%(Max.)
Operating angle 5°(Receiver side) 30°(Reflector side) -
 
Light source Infrared LED
(880nm)
Red LED
(700nm)
Red LED
(700nm)
Infrared LED
(880nm)
Indicators
Trns.: Power indicator (Orange LED)
Rcvr.: Operating indicator (Orange LED)
Stability indicator (Green LED)
Operating indicator(Orange LED)
Stability indicator(Green LED)
Potentiometer Sensitivity adjustment
Circuit protection Short circuit protection built-in
Materials Case Polycarbonate
Lens Acrylic
Wiring Flying lead
Transmitter(gray):Outer dia. ø6mm, 2m length
Receiver(black):Outer dia. ø6mm, 2m length
Outer dia. ø6mm, 2m length
Connector M12 Quick disconnect (90 degree adjustable)
Weight Flying lead Approx 125g (each transmitter/receiver) Approx. 125g
Connector Approx 26g (each transmitter/receiver) Approx 26g
Accessory None K-7 reflector None

ENVIRONMENTAL SPECIFICATIONS

Ambient light 5,000lx or less
Operating temperature -25℃ to +55℃ (Storage : -40℃ to +70℃)
Operating humidity 35 to 85%RH
Enclosure protection IP67
Vibration resistance 10Hz to 55Hz, 1.5mm Amplitude,2 hours, X,Y and Z directions
Shock resistance 100m/s2 3 times in X,Y and Z directions
Dielectric strength 1,000VAC for 1 minute
Insulation resistance Min.20 MΩ (at 500VDC)
go to page top
  Copyright © TAKENAKA ELECTRONIC INDUSTRIAL CO.,LTD. All Rights Reserved.