| Models |
NT30F |
| Detection |
Through beam |
| Range(Max.) |
30m |
| Object resolution |
ø22mm (Min.) Opaque object |
| Power Supply |
DC 12 - 24V ±10%, Ripple 10%
(Max.) |
| Current consumption |
Trns.: 50mA, Rcvr.: 35mA |
| Output Mode |
| Current output |
Rating : Sink Current 100mA (DC30V) Max. |
| Voltage output |
Rating : Output impedance 4.7kΩ |
|
| Operating mode |
Light / Dark-ON selectable |
| Self-checking function |
| Trns.: |
Check signal input (Pin No.4)
Monitor output (Pin No.3) … Normaly ON operation
(Sink Current 100mA (DC30V) Max., Output impedance 4.7kΩ) |
|
| Rcvr.: |
Margin output (iPin No.4) … Glitch ON operation
(NPN open collector, Sink Current 100mA (DC30V) Max.)
the amount of light received monitor, Earphone jack tarmminal built-in |
|
| Response time |
5ms (Max.) (NT30FA: 0.5ms) |
| Light source |
Infrared LED |
LED Indicator
Sensitivity |
(Trns) P.L :
NORM.OP : |
Power (Red)
Monitor output (Green) |
|
(Rcvr) OP.L :
UP : |
Operation (Red)
Safety margin (Green) |
|
| Switch |
Light / Dark-ON selectable |
| Circuit protection |
Short circuit protection built-in |
| Material |
Zinc dicast |
| Connection |
Terminal block type (screw: M3.5,
width: 8.1mm) |
| Weight |
Trns.:700g, Rcvr.:700g |
