| Models |
NPN output |
CS-R80 |
| PNP output |
CS-R80PN |
| Detection method |
Detection by R.G.B color ratio |
| Power supply |
12-24VDC±10%, Ripple 10% Max. |
| Current consumption |
50mA(Max.) |
| Standard color resistered |
teaching 1 color (Mode 1)
teaching 3 colors (Mode 3) *1 |
| Input/Output |
Teaching by set button or external input : 1 output (Mode 1)
Teaching by set button : 3 output (Mode 3) |
| External teaching |
Non voltage input(contact, non contact)(valid for Mode 1) |
| Output mode |
NPN output |
NPN open collector output
Sink current 50mA(DC30V)Max. residual voltage : 2V |
| PNP output |
PNP open collector output
Source current 50mA(DC30V)Max. residual voltage : 2V |
| Operating mode |
Conformity On or Off selectable |
| Time delay |
Selectable between On delay, Off delay and timer disabled
Delay time : 250ms fixed |
| Response time |
50ms or less *2 |
| Indicators |
Operation indicator : "OP" LED lights
Level indicator : Level Max. "H" LED lights
Level indicator : Level Min. "L" LED lights |
| Display |
4 digit indicator |
| Switches |
(+),(-) Push button switch:
select Mode/resister standard color/change setting value/select channel
Selectable switch: select RUN/SELECT/SET |
| Circuit protection |
Short circuit protection |
| Materials |
Polycarbonate |
| Cable |
Flying lead 2m(outer dia φ3.7) |
| Weight (Max.) |
60g |
*1 The factory setting is Mode 1.
*2 The detection is activated after 1 second of power ON. Response time is fluctuated by ambient light.
*3 Recommended fiber : FT105BC-CS, Detecting distance : 5mm or less
