Japanes

• Corporate Information
• Products Information
• News
• Contact Us

Fiber Sensors Photo Sensors with Built-in Amplifier Light Curtain Sensors Background Suppression Photo Sensors Ultrasonic Sensors AC/Photo Sensors with Built-in Amplifier Mark Sensors Color Sensors Control Unit Photo sensors for Steel and Heavy industries Products for Specific Application Digital Devices New Products Download Sample Applications

Home > Products Info > Digital Devices > ANP-5D6D | SRB20 | SRS | SRB-7448 | ANP-5D/6D | ANP1F | 　   Capable of high-accuracy analog control High-speed sampling With one-line input, input signals are captured at a sampling frequency of 2,000/sec as close to real time as possible (frequency at 1,000/sec each for two-line input). Averaging Averaging feature is selectable between six cycle settings: 1, 10, 30, 50, 100 and 200. One-cycle averaging allows judgment in 0.5 ms, which outputs a signal in response to an instantaneous variation. 200-cycle averaging is suitable for slow and smooth control. Analog delay The amplifier frequency characteristic is selectable between high speed (about 1 MHz) and low speed (about 1 kHz). Operation For two-line input, addition/subtraction selection is available between “Ch 1 + Ch 2” and “Ch 1 – Ch 2.”   　 PDF 　 Model ANP-5D ANP-6D Power supply 24V DC ±10% max. Current consumption 150mA max. A/D conversion Successive approximation; 12-bit (4096 division) Measuring range 0-5/0-10 VDC (selectable with switch) Resolution Analog input with 5 V setting: 1.221 mV (calculated value) Analog input with 10 V setting: 2.442 mV (calculated value) Analog input 1-line input for Ch 1/2-line input; addition or subtraction available Display format 5-digit: 20.000 V (max.)- -10,000 V (min.) Display size 7-segment red LED; character size: 8 x 4 mm Display frequency 20 times/s Sampling frequency 1-line input: 2,000/s; 2-line input: 1,000/s Averaging 1/10/30/50/100/200 times (selectable) No. of outputs 3 (L/M/S) 4（ＨＨ/HL/LO/LL) Rating NPN open collector output / Rating: sink current 100 mA (30 VDC) max. Indicator 3 indicators (L: Red / M: Orange / S: Yellow) 4 indicators (HH:RED / HI:Orange/LO: Yellow/ LL: Green) Activation level Closed or 1.0 VDC or lower Deactivation level Open or 2.8 VDC or higher Response time Activation: 35 ms max.; deactivation: 70 ms max. Indicator Green (front panel) Reference setting 2 5-digit settings: [1] P/L (large), [2] P/S (small) 4 5-digit settings: [1] HH [2] HI [3] LO [4] LL Analog delay Amplifier frequency characteristic: H: high frequency/L: low frequency (selectable with switch) Case material Resin Connection Terminal block/DIN panel mounting Mass 350g max