 |
 |
|
 |
| |
- Capable of high-accuracy analog control
- High-speed sampling With one-line input, input signals are captured at a sampling frequency of 2,000/sec as close to real time as possible (frequency at 1,000/sec each for two-line input).
- Averaging Averaging feature is selectable between six cycle settings: 1, 10, 30, 50, 100 and 200. One-cycle averaging allows judgment in 0.5 ms, which outputs a signal in response to an instantaneous variation. 200-cycle averaging is suitable for slow and smooth control.
- Analog delay The amplifier frequency characteristic is selectable between high speed (about 1 MHz) and low speed (about 1 kHz).
- Operation For two-line input, addition/subtraction selection is available between “Ch 1 + Ch 2” and “Ch 1 – Ch 2.”
|
|
 |
|
|
| |
|
| |
 |
| Model |
ANP1F |
| Power supply |
100,110 V / 200, 220VAC ±10% 50/60Hz |
| Power consumption |
5VA max. |
| Output mode |
(1) Relay output (with timer): Rating: 5 A (250 VAC) resistance load 1c
(2) 2NPN open collector outputs: Rating: 50mA(30VDC)max. |
| Input mode |
Voltage input: 1-8 V Input impedance 47KΩ Input resolution: 01V min. |
| Power supply to sensor |
12V DC ±5% 80mA max. |
| External gating |
Contact or NPN transistor input for output mode (1) only L: 1V max. H: 6V max. |
| Response time |
| Sensor input |
: relay contact output 25 ms max.
: NPN open collector output 0.1ms max.
: External gating input 25ms max. |
|
| Indicator |
P.L(G): power indicator (green LED; turns red at activation of relay).
OP.L: operation indicator (2 red LEDs for HIGH and LOW outputs)
LEVEL: light reception level indicator (12 red LEDs) |
| Volume |
POSI.: Position volume: 4-turn, 1 each for HIGH and LOW
HYS.: Hysteresis volume (variable between 0 and 1 V), 1 each for HIGH and LOW
TIME: Timer volume (selectable between 0.1-1 and 1-10 s), relay output only |
| Switch |
| MODE |
: EXT.POSI switch(pushbutton)
: Output mode/level selector switch
: Operation mode and timer selector switch |
|
| Case material |
Resin |
| Connection |
Plug-in terminal block |
| Mass |
450g max. |
| Applicable sensor |
Analog voltage output sensor |
|
|
