Type	NPNoutput	PNPoutput
	Model	F80R	F80RPN
	Power supply	12-24V DC ±10% / Ripple 10% or less
	Power consumption	650 mW max. (25 mA max. at 24 V)	830 mW max. (32 mA max. at 24 V)
	Output mode	NPN open collector Rating: sink current 100 mA (30 VDC max.) Residual voltage: 1 V or less	PNP open collector Rating: source current 100 mA (30 VDC max.) Residual voltage: 2 V or less
	Operation mode	Light-ON/Dark-ON selectable with sliding switch
		Timer : Off delay/disabled selectable with sliding switch Delay time: 45 ms fixed
	Response time (*1)	High-speed mode: 190 μs s or less / Long-distance mode: 1.8 ms or less
	Light source (wavelength)	Red LED (680 nm)
	Indicator	Operation indicator: orange LED / Mode indicator: yellow LED / Teaching indicator: green LED
	Display	Received light level: 4 digits in orange LED (0-8000)
	Switch	Output mode selector switch × 1 / Timer selector switch: 1 / Teaching and sensitivity adjustment push + 4-direction button switch × 1
	Sensitivity setting	Full auto teaching / Auto teaching
	Sensitivity adjustment function	Provided (manual sensitivity adjustment)
	Protection circuit	Reverse connection protection / Short circuit protection /Serge absorption
	Material	Polycarbonate
	Wiring	Permanently attached cord (Outer dimension: dia.3.7) 0.2sq. 3 core 2m length
	Mass	Approx. 60 g (including 2-m cord and mounting bracket)
	Accessory	Mounting bracket / Operation manual
	Ambient light	Illumination on light receiving surface: 3,500 lx (incandescent lamp)
	Ambient temperature	1-5 adjacent units in operation: –25 - +55 °C / Over 5 adjacent units in operation: –25 - +50 °C
		Storage: –40 - +70 °C (non-freezing)
	Ambient humidity	35-85%RH (non-condensing)
	Protective structure	IP40
	Vibration	10-55 Hz / 1.5 mm amplitude / 2 hours each in 3 directions
	Shock	500 m/s2 / 3 times each in 3 directions

(*1) For initial setting and checking, output operation is disabled for about 1.5 seconds after power-up.
The operation mode factory setting is long-distance mode.