| Models |
SSP-S204R(-PJ) |
SSP-S208R(-PJ) |
| Detection |
Retro-reflective/Diffuse reflective |
| Range |
Retro-reflective (2m Max.)
Diffuse reflective: 700mm (Cartridge paper 300mm × 300mm)
400mm (18% reflectivity gray card) |
| No. of optical axis |
4 |
8 |
| Detection width |
100mm |
225mm |
| Power supply |
12 to 24VDC ±10 %, Ripple 10 % (Max.) |
| Current consumption |
68mA(12VDC)
42mA(24VDC) |
78mA(12VDC)
48mA(24VDC) |
| Output mode |
NPN / PNP output selectable
Rating : Current 50mA (30VDC)Max. Residual voltage 2V or less |
| Operating mode |
Normal open/Normal close selectable |
| Job indicator input |
Non-contact or contact input
Operating voltage : NPN 2V or less/ PNP 4V or more |
| Response time |
120ms or less |
| Light source |
Red LED(Wave-length 640nm) |
| Indicators |
Sensitivity indicator (Green/Orange) / Operating indicator(Orange)
Job indicator (Green)/ Fault indicator(Red) |
| Job indicator |
Flickering |
| Short circuit protection |
Built-in |
| Material |
Enclosure: Aluminum, Lens : Polycarbonate, End plate: Resin |
| Wiring |
Flying lead (Outer dia.F4.1) 2 m length
0.2mm2×4 cores(Black)
(-J : M12 connector type) |
| Incidental function |
Automatic initialization function/ Automatic re-initialization function |
| Weight |
120g |
180g |
