 |
Series |
SS80 series |
| Detection method |
Through-beam type |
| Detecting distance |
3-15m max. |
| Detecting object |
Opaque object
of ø92 min. |
| Light axis interval |
80mm |
| Power supply |
DC12-24V ±10% |
| Power supply |
NPN open collector output Rating:
sink current 100mA (30VDC) max.
(PNP output type (model No. ending with “-PN”)
is separately available) |
| Operation mode |
A/O mode switching A mode: activated
when beams of all axes are received (deactivated when beam
of any axis is blocked)
A/O mode switching O mode: activated when beam of any axis
is received
(deactivated when beams of all axes are blocked) |
| Response time |
15ms max. |
 |
Light source
(wavelength) |
Infrared LED (880nm) |
| Light-sensitive element |
Photo transistor |
| Indicator |
Transmitter: Power indicator
(green LED) / M/S indicator (red LED) / Light axis alignment
indicator (green LED)
Receiver: Operation indicator (red LED) / Stable light reception
indicator (green LED) / Light axis alignment indicator (green
LED) |
| Switch (SW) |
Transmitter: M/S mode switch
provided
Receiver: A/O mode switch provided |
| Auxiliary functions |
Anti Interference feature for
adjacent installation, output short circuit protection |
| Material |
Case: aluminum / Front cover/lens:
Acrylic |
| Connection |
Permanently attached cord with
connector (cord length: 0.2m) / Cord with connector
Cord: with four 0.5mm2 cores (Outer dimension: dia.6.8) |
| Accessory |
Cord with connector (cord length:
5m), mounting brackets, operation manual |
| Notes |
(PNP output type is separately
available.) |
 |
Ambient light |
9,000lx max. |
| Ambient temperature |
-10～+55℃(non-freezing) |
| Ambient humidity |
35-85%RH (non-condensing) |
| Protective structure |
IP66 |
| Vibration |
10 - 55Hz / 1.5mm amplitude /
2 hours each in 3 directions |
