| Model |
FD-A320 |
FD-A320H |
| Type of output |
Relay Output |
PhotoMOS Relay Output |
Bestact Relay Output |
PhotoMOS Relay Output |
| Operation |
Mode |
ON-OFF control
Light ON |
| Rating |
Transfer contact 1c MAX 5A 250V AC (Resistive Load) |
1a MAX 0.1A 250V AC/DC (Resistive Load) |
1a 0.5A 220V AC 0.3A 110VDC (Inductive load) |
1a MAX 0.1A 250V AC/DC (Resistive Load) |
Response
time |
Relay Output：
17ms or less |
PhotoMOS Relay Output：
4ms or less |
Bestact Relay Output：
6ms or less |
PhotoMOS Relay Output：
4ms or less |
| Stability output |
Operation Mode |
After seven consecutive runs with less margin for the threshold light intensity |
| Rating |
Relay Output： 1a MAX 5A 250V AC (Resistive Load)
PhotoMOS Relay Output： 1a MAX 0.1A 250V AC/DC (Resistive Load) |
| Current |
Operation Mode:4mA to 20mA analog signals (Allowable load resistance ： 0 to 500Ω)
Response time 4ms or less F.S |
| Valid Lens Aperture |
28mm DIA (OHA/OHAN/OHAN10) |
| Power supply |
AC100 to 240V +10% -15% 50/60Hz |
| Power Consumption |
6W or less |
| Connection Method |
Connector type leaded 2m wire (VCTF 0.75sq x 16c) |
| Ambient temperature |
Optical head /Optical Fiber Unit: -25 to +200℃
Amplifier unit : -25 to +50℃ (with no icing) |
| Storage temperature |
-40 to +70℃（with no condensation and no icing) |
| Ambient humidity |
35 to 85% RH (with no condensation) |
Bending limit of
optical fiber unit |
50mm radius |
Insulation
resistance |
Power supply to Case :20MΩ or more at 500VDC,
Control Output･Stabiliy Output to Case :20MΩ or more at 500VDC
Power supply to Control Output･Stabiliy Output :20MΩ or more at 500VDC
Case to 4mA－20mA Output :20MΩ or more at 500VDC,
Power supply to 4mA－20mA Output :20MΩ or more at 500VDC
Case to Simulation Input :20MΩ or more at 500VDC,
Power supply to Simulation Input :20MΩ or more at 500VDC |
Dielectric
strength |
Power supply to Case :1500V AC 1 min (10mA)
Case to Control Output･Stabiliy Output :1500V AC 1 min (10mA)
Power supply to Control Outputstrength ･Stabiliy Output :1500V AC 1 min (10mA)
Case to 4mA－20mA Output :500V AC 1 min (20mA) ,
Power supply to 4mA－20mA Output :500V AC 1 min (20mA)
Case to Simulation Input :500V AC 1 min (20mA),
Power supply to Simulation Input :500V AC 1 min (20mA) |
| Vibration resistance |
10 - 55Hz Single amplitude 1.5mm 2hours
each in X.Y.Z. directions |
| Shock resistance |
500 m/s2 (Approx.50G) Three times each in X.Y.Z. directions |
| Protective Construction |
IP64 |
| Mass |
Optical head |
Standard type (OHA):Approx. 680g
Narrow type (OHAN) :Approx. 840g Narrow type (OHAN10):Approx. 860g
Wide type (OHW1/OHW2): Approx.1300g |
| Airless Hood |
F38A : Approx. 240g F38A-03: Approx. 430g
F38A -04 : Approx. 550 F38A-05: Approx. 650g
F38W : Approx. 600g |
| Air Purge Hood |
F38PC-02 : Approx. 240g F38PC-05: Approx. 440g
F38PC-03 : Approx. 300g 302W : Approx. 600g
F38PC-04 : Approx. 370g |
Optical Fiber
Unit
(FG series) |
FG2 :Approx. 0.7 kg FG3 :Approx. 0.9 kg FG4 :Approx. 1.1 kg
FG5 :Approx. 1.3 kg FG7 :Approx. 1.6 kg FG10 :Approx. 2.1 kg
FG15 :Approx. 3.1 kg FG20 :Approx. 4.1 kg FG30 :Approx. 6.1 kg |
Amplifier
Unit |
Amplifier Unit : Approx.1100g Attached cable：Approx.620g |
