| Output specification |
| Models |
FT-L101 |
| Light source |
Infrared LED |
| Light monitor |
Output |
Relay contact output 1C |
| Operation |
 |
| Rating |
AC250V 2A (Resistance load) |
| Models |
FT-R101 |
| Output mode |
Relay contact output 1C |
| |
Rating |
AC250V 2A (Resistance load) |
| Operating mode |
Light-ON / Dark-ON (Switching) |
| Response time |
| 20ms Max. |
| General specification |
| Range |
| Fiber unit |
Only fiber unit |
on FA51/52 |
on OHC |
| GT205AD |
55cm |
2.7m |
22m |
| GT21AD |
55cm |
2.7m |
22m |
| GT22AD |
50cm |
2.5m |
20m |
| GT23AD |
45cm |
2.2m |
18m |
| GT25AD |
40cm |
2.0m |
16m |
| GT27AD |
35cm |
1.8m |
14m |
| GT210AD |
30cm |
1.5m |
12m |
|
Fiber-optic unit
allowable bending radius |
50mm |
| Power Supply |
AC100 to 240V,
±10% 50/60Hz |
| Power consumption |
Trns. Rcvr.: 2W Max. |
| Indicators |
Trns. |
Power: Greeen LED, Monitor: Red LED |
| Rcvr. |
Power: Greeen LED, Monitor: Red LED |
| Connection |
Terminal block type (screw: M3.5, width: 8.1mm) |
| Usage ambient temperature |
Optical head, Fiber unit: -25 to +200ºC
Amp. unit: -25 to +55ºC (Non freezing) |
| Storage temperature
range |
-40 to +70ºC (Non condensing) |
| Usage ambient humidity |
35 to 85%RH (Non condensing) |
| Usage ambient illuminance |
10,000 lx (incandescent lamp) |
Fiber-optic unit
allowable bending radius |
IP66 |
| Resistance to vibration |
10 to 55Hz, Doble oscillation 1.5mm X, Y, Z 3ways
2hours on each |
| Voltage endurance |
Input/Output - Case, Input - Output
AC2000V per minute |
| Insulating resistance |
20MΩ Max. (at DC500VM) |
| Marerials |
Zinc dicast |
| Weight |
Trns.: 720g, Rcvr.: 720g |
