| Control output |
One-hole detection outut |
Relay contact 1C and NPN open collector output
(floating) |
| Two-hole detection outut |
Relay contact 1C and NPN open collector output
(floating) |
| Output rating |
Relay contact: AC250V 5A (Resistance load)
NPN open collector output: DC30V 100mA |
| Operating mode |
One-shot output 0.1 to 1s variable (Panel side
volume) |
| Response time |
Relay contact: 30ms Max.
NPN open collector output: 3ms Max. |
| SAFETY |
Output |
Relay contact 1a |
| Output rating |
AC250V 5A (Resistance load) |
| Alarm output (ALARM) |
Operating mode |
 |
| Output rating |
Relay contact AC250V 5A (Resistance load) |
| Rcvr. check input |
a contact input (Pin9 - Pin10 operate at short
circuit) |
| Power Supply |
AC100V or 110V or 200V or 220V
(Rating voltage -15% +10% 50/60Hz) |
| Power consumption |
30W Max. |
| Usage ambient temperature |
-25 to +55ºC (Non freezing) |
| Storage temperature
range |
-40 to +70ºC (Non condensing) |
| Usage ambient humidity |
35 to 85%RH (Non condensing) |
| Voltage endurance
/ Insulating resistance |
| Power - Case
Relay contact output - Case
Relay contact output - Power |
AC1500V per minute
at DC500VM 20MΩ Max. |
| Open collector output - Case
Open collector output - Power |
AC1500V per minute
at DC500VM 20MΩ Max. |
|
| Resistance to vibration
|
10 to 55Hz, Doble oscillation 1.5mm X, Y, Z 3ways
2hours on each |
| Impact resistance |
490m/s2 X, Y, Z 3ways 3times on each |
| Connection |
Terminal block type |
| Protective construction |
IP40 (with case) |
| Weight |
9kg |
