| Model |
DX-7AH |
| Detection distance |
0.5-7.5m (Comparator output : 0.5-7.0m) *1 |
| Standard detecting object |
70f70cm White drawing paper |
| Power supply |
12-24V DC,10% Ripple 10% (Max.) |
| Power consumption |
2.3W (Max.) |
| Analog output characteristic |
Current output |
4 to 20mA,10% (Allowable load resistance 250Ω Max.) |
| Resolution |
,5%F.S. (Max.) *4,*5 |
| linearity |
10%F.S. (Max.) *4 |
| Response frequency |
Approx. 20Hz *2 |
Comparator
Output characteristic |
Setting range |
0.5 to 7.0m *1 |
| Output mode |
NPN open collector, Sink current 50mA (Max.) (30V
DC Max.), Residual voltage 2V (Max.) |
| Response frequency |
Approx. 20Hz |
| Operating mode |
Light-on / Dark-on selectable |
| Load short-circuit protection |
Built-in |
| Light source (wavelength) |
Infrared LED (870nm) |
| Switch(SW) |
Push button switch f3 |
| Teaching method |
Auto teaching (Comparator output only) |
| Teaching variation |
One point normal teaching / Two point normal teaching
/ One point zone teaching |
| Materials |
Case |
Aluminum (anodized aluminum processing) |
| Front and rear panel |
ABS resin |
| Lens |
Polycarbonate |
| Cover for lens |
Polycarbonate |
| Connection |
Six pin waterproof plastic connector |
| Weight |
Approx. 200g |
| Accessory |
Cable with connector (*3), 250 resistor for current-voltage
conversion, Instruction manual |
