| Models |
USA-S1AN |
USA-S3AN |
| Detection |
Ultrasonic reflection |
| Range |
100 to 1000mm |
400 to 3000mm |
| Non sensing range |
Less than 100mm |
Less than 400mm |
| Detecting object |
100 x 100mm, t=2mm,
Alminum board |
| Power supply |
12V to 24VDC, 0%,
Ripple 10% Max. |
| Power consumption |
1.3W(Max.)
(Current consumption approx. 110mA at 12VDC approx.
55mA at 24VDC) |
| Response time |
150ms(Max.) |
300ms(Max.) |
| Analog output |
4 to 20mA Current
output (Load resistive 0 to 250 Ohm) |
| Min. resolution(*1) |
0.9mm(0.1% F.S.) |
2.6mm(0.1% F.S.) |
| Linearity |
,1% within F.S. |
| Temperature charact. |
1% F.S.(Max.) against an output value
at 23ºC
in a range of -10 to 55ºC |
| Ultrasonic frequency |
Approx. 200KHz |
Approx. 75KHz |
| Indicators |
Operation: Orange,
Run: Green, 4mA: Red, mid: Orange, 20mA: Green |
| Teaching system |
Distance setting,
Output inversion |
| Teaching input |
SET button or external
input |
| Connection |
M12 x 4p Din connector
system *2 |
| Weight |
150g(Max.) |
300g(Max.) |
| Protection |
Output short circuit
protection,
Power output reverse connecting protection |
| Features |
Mutual interference
prevention/
Temperature compensation built-in |
| Materials |
Case: Nickel-plated,
Detection
face: Nylon resin, Silicon, Glass epoxy resin |
| Temperature range |
Operating : -10 to +55ºC, Storage
: -40 to +85ºC |
| Humidity |
35 to 85%RH |
| Enclosure rating |
IP67 |
| Vibration resistance |
10Hz |
| Shock resistance |
50G 3 times in X,
Y and Z directions |
| Dielectric strength |
1,000VAC 50/60Hz
for 1minute |
| Insulation resistance |
Min. 50MΩ (at 500VDC) |
