Detection method | Through beam |
---|---|
Detection distance | Parallel beam mode: 0-4m Cross beam mode: 0.5-4m |
Detection target | Parallel beam mode: Opaque φ25㎜ or more Cross beam mode: Opaque φ15㎜ or more |
Optical axis interval | 20mm |
Number of optical axes | 29 |
Detecting width | 560mm |
Power supply | 12-24VDC ±10%, Ripple 10% |
Power consumption | 110mA or less |
Output mode | NPN/PNP Open collector output (Output selectable) Load current: 50mA (30VDC) or less Residual voltage: 2V or less |
Operation mode | Light ON: Activated when beams of all optical axes are received (Deactivated when a beam of any optical axis is blocked). |
Response time | Parallel beam mode: 20ms or less when light blocked, 30ms or less if when light received. Cross beam mode: 30ms or less when light blocked, 50ms or less if when light received. |
Light source (wavelength) | Infrared LED (850nm) |
Light receiving element | Photo IC |
Indicators | Transmitter: Power Indicator (Green), Slave Indicator/Cross beam Indicator (Blue), Cross beam Indicator (Blue) Receiver: Power Indicator/Light reception stability Indicator (Green), Operation Indicator (Orange) |
Auxiliary functions | Automatic sensitivity compensation, Mutual interference prevention for close proximity installations (Up to 2 sets in Parallel beam mode), Reverse polarity protection, Short-circuit protection |
Protection Material | Case: Aluminum, Front cover: Poly carbonate, Mounting part: Zinc alloy die casting |
Connection | Attached cable φ3.5㎜, 3m Transmitter: 0.15㎜2 × 4 cores (Gray), Receiver: 0.15㎜2 × 5 cores (Black) |
Weight | Transmitter Approx. 285g Receiver Approx. 295g |
Accessories | Instruction Manual, small 3-point SEMS screw M4 |