Detection method Through beam
Detecting distance 2m
Detection object Opaque dia.35mm or more
Number of beams 10
Detecting width 225mm
Beam interval 25mm
Power supply 12-24VDC ±10% / Ripple 10% or less
Current consumption 140mA or less
Output mode Control output : Selectable between NPN output and PNP output with switch
Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less
Operation mode Light ON/Dark ON selectable (with switch)
Frequency switching feature Provided (for up to 2 units)
Response time Normal:
Light reception: 68 ms or less
Light blocking: 42 ms or less
With frequency switching
feature enabled:
Light reception: 74 ms or less
Light blocking: 52 ms or less
Job light input Contact or non-contact input
Light source Infrared LED (wavelength : 880nm)
Indicator Transmitter: Power indicator (green LED) / Job indicator (green)
Receiver :Received light intensity indicator (green / orange LED) / Light blocking indicator (orange LED)
Job indicator (green) / Fault indicator (red LED)
Job indicator
Fault indicator
Continuous/flashing illumination selectable with the switch
Flashing speed: FAST/SLOW selectable with the switch
Output short circuit protection Provided
Automatic sensitivity compensation Provided
Material Case : Aluminum / caps at ends (mounting legs): PBT with glass fiber
lens: Polycarbonate / switch cover: Polyester elastomer
Connection outer diameter: dia. 4.1 mm, Transmitter: 0.2mm2 x 3 cores, 2m, (gray)
Receiver: 0.2mm2 x 4 cores, 2m, (black)
Weight Transmitter: approx. 160g
Receiver: approx. 170g
Accessory Screwdriver for switch operation mounting bracket is not separately available.

Environmental Specification

Ambient light 10,000lx or less
Ambient temperature -10 - +55 ℃ (non-freezing)
Ambient humidity 35-85%RH (non-condensing)
Vibration 10 - 55Hz / 1.5mm double amplitude / 2 hours each in 3 directions
Shock 500m/s2 / 2 times each in 3 directions
Protective structure IP62
Dielectric withstanding 1,000VAC 50/60Hz for 1 minute
Insulation resistance 500VDC, 20MΩ or higher.