SSP-S208R

Rating/Performance/Specification

Detecting distance Retro reflective : 2m or less
Diffuse reflective : 700mm(White drawing paper 300mmx300mm)
400mm(18% reflectivity gray card A4 size)
Number of beams 8
Detecting width 225mm
Power supply 12-24VDC ±10% / Ripple 10% or less
Current consumption 92mA or less / DC12V
58mA or less / DC24V
Output mode Control output : NPN / PNP output selectable
Rating : NPN output: Sink current 50mA (30VDC) or less residual voltage 2V or less
PNP output: Source current 50mA (30VDC) or less, residual voltage 2V or less
Operation mode Normal open/Normal close selectable
Job indicator Input: Non-contact or contact input
Operating voltage: NPN 2V or less/ PNP 8V or more
Response time 120ms or less
Light source Infrared LED (wave length: 640nm)
Indicators Initial sensitivity setting indicator (green LED/orange LED)/ Operating indicator(orange LED)
Job indicator (green)/ Fault indicator(red LED)
Job indicator
Fault indicator
Flashing
Short circuit protection Provided
Material Enclosure: Aluminum, End caps: PBT with glass fiber,
Lens: Polycarbonate
Wiring Outer diameter: dia.4.1mm, 0.2mm2x 4cores, 2m (black)
Auxiliary functions Automatic initialization function/Automatic re-initialization function
Weight Approx. 170g
Accessories Driver for switch operation, operation manual (mouning bracket and reflector are separately available.)

Environmental Specification

Ambient light 10,000lx or less
Ambient temperature -10 - +55 ℃ (non-freezing)
storage temperature -25 - +70 ℃ (non-freezing or non-condensing)
Ambient humidity 35-85%RH (non-condensing)
Vibration 10 - 55Hz / 1.5mm double amplitude / 2 hours each in 3 directions
Shock 500m/s2 / 2 times each in 3 directions
Protective structure IP62
Dielectric withstanding 1,000VAC 50/60Hz for 1 minute
Insulation resistance 500VDC, 20MΩ or higher.