| Detection method | Through beam type, reflective type (Dependant on fiber optic cable) |
|---|---|
| Detecting distance | Dependant on fiber optic cable |
| Power supply | 12 - 24VDC ±10％ / Ripple 10％ or less |
| Current consumption | 30mA or less |
| Output mode | PNP open collector output Rating: source current 100 mA (30 VDC) or less |
| Operation mode | Light ON/Dark ON selectable (with selector switch) |
| Response time | 500 μs or less |
| Hysteresis | Up to 10% of detecting distance |
| Light source (wavelength) | Red LED (660nm) |
| Indicator | OP.L: Operation indicator (red LED) STB: Stability indicator (green LED) |
| Volume (VR) | SENS : Sensitivity adjustment volume provided |
| Switch (SW) | Light ON/Dark ON selector switch; L: Light ON/D: Dark ON |
| Short circuit protection | Provided |
| Material | Case : Noryl (filler: styrene elastomer) |
| Connection | Connector type (cable with connector separately available) |
| Weight | Approx. 65 g |
| Accessory | Instruction manual, Screwdriver for adjustment, DIN rail mounting bracket (material: polycarbonate) |
| Ambient light | 3,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) Storage: -40‐+70℃ (non-freezing) |
| Ambient humidity | 35 - 85%RH (non-condensing) |
| Protective structure | IP65 |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |