| Power supply | 12 to 24VDC Ripple 10% or less * |
|---|---|
| Power consumption | 1000mW or less (40mA or less at 24V) |
| Control output | PNP open collector output / Load current 100mA (30VDC, class2) or less / Residual voltage: 2V or less NPN open collector output / Load current 100mA (30VDC, class2) or less / Residual voltage: 2V or less |
| Operation mode | Light ON / Dark ON |
| Timer | ON delay, OFF delay, ON/OFF delay, One-shot, Timer off Delay timer : 1ms to 9999ms (set in millisecond) |
| Response time | H-SP mode : 50 μs or less / Standard mode : 500 μs or less / Long mode : 4ms or less / Super long mode : 32ms or less |
| Light source (wavelength) | Four-element (ALGalnP) LED (660nm) |
| Indicator | Operation indicator, Setting / Teaching indicator, Light ON/Dark ON indicator: orange LED |
| Display | Received light level : 4 digits in red LED (high-speed mode (0 to 3800), standard/long/super long modes (0 to 9999)) Threshold : 4 digits in green LED (high-speed mode (0 to 3500), standard/long/super long modes (0 to 9700)) |
| Sensitivity setting | 2-point teaching / Max sensitivity teaching / Full auto teaching / Positioning teaching / Window mode teaching |
| Light source level adjustment | Provided (auto / manual) |
| Mutual Interference prevention | UP to 8 units (standard, long, and super long modes) / 0 unit (high speed) |
| Protection circuit | Power reverse connection / Output short-circuit protection |
| Material | Polycarbonate |
| Wiring | Cable with M12 connector (cable length: 0.15m) 0.2mm2×4-core, o.d. Ø4.2mm) |
| Weight | Approx. 35g |
| Accessory | Instruction manual |
* UL: Class 2 power source
| Ambient light | Illumination on light receiving surface: 3,500 lx or less (incandescent lamp) |
|---|---|
| Ambient temperature | 1 to 5 adjacent units in operation : -25 to +55°C 6 or more adjacent units in operation : -25 to +50°C *1 Storage: -40 to +70°C (no freezing or condensation) |
| Ambient humidity | 35 to 85% RH (no condensation) |
| Protective structure | IP40 |
| Vibration | 10 to 55 Hz / 1.5 mm double amplitude / 2 hours each in X, Y, and Z directions |
| Shock | 500 m/s2 / 3 times each in X, Y and Z directions |
| Dielectric withstanding | 1000 VAC for 1 minute |
| Insulation resistance | 500 VDC mega, 20 MΩ or more |
*1 UL: Maximum ambient temperature: +50°C for single use, +40°C for two or more units connected installation.