F70AG

Rating/Performance/Specification

Power supply 12 - 24VDC ±10% / Ripple 10% or less
Current consumption 39 mA or less
Output mode Open collector output / Rating: Sink current 100 mA (30 VDC) or less / Residual voltage: 1 V or less
Operation mode Light ON/Dark ON selectable
Timer Off delay/disabled selectable Delay time: 40 ms fixed
Response time Light emission frequency channel 1: 600 μs or less
Light emission frequency channel 2: 700 μs or less
Light source(wavelength) Green LED (525nm)
Indicator Operation indicator: orange LED / Stability (STB) indicator: green LED
Display LCD display with backlight
Switch 2 set buttons / Mode selector switch: RUN/SET
Sensitivity setting Full auto teaching / Auto teaching
Sensitivity setting input Set button input
Sensitivity adjustment function Provided (manual sensitivity adjustment)
Functions * Mutual Interference prevention feature
* Short circuit protection feature
Material Polycarbonate
Connection Attached cable (outer diameter: 4.8mm) 0.2mm2, 3 cores, 2m
Weight Cable type: approx. 80 g (including cables and mounting bracket); M8 connector type: approx.. 25g
Accessory Mounting bracket / Operation manual

(*) Detection can start when more than 0.5 seconds has passed after power up. If the load and this sensor use different power sources, be sure to turn on the sensor first.

Environmental Specification

Ambient light Incandescent lamp: 10,000 lx / Sunlight: 20,000 lx
Ambient temperature 1-3 adjacent units in operation: -25 - +55 ℃
4-10 adjacent units in operation: -25 - +50 ℃
11-16 adjacent units in operation: -25 - +45 ℃
Storage: -40 - +70 ℃ (non-freezing)
Ambient humidity 35 - 85%RH (non-condensing)
Protective structure IP40
Vibration 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
Shock 500 m/s2 / 3 times each in 3 directions
Dielectric withstanding 1000 VAC for 1 minute
Insulation resistance 500 DVC, 20MΩ or more