Rating/Performance/Specification

Model	Force sensitive sheet sensor (amplifier: KSS85, force sensitive sheet: KS-100, KS-15)
Power supply	12 to 24VDC, Ripple: 10% or less
Current consumption	at 24 V DC Normal mode: 600mW (current consumption 25mA or less) ECO mode: 480mW (current consumption 20mA or less)
Detection senstivity	300 g = approx. 3 N (reference value)
Output mode	NPN/PNP switchable NPN open collector output　 Load current: 100mA (30V DC) or less, residual voltage: 2V or less PNP open collector output　 Load current: 100mA (30V DC) or less, residual voltage: 2V or less
Operation mode	NO (Normally Open) / NC (Normally Closed) switchable
Timer	ON delay / OFF delay / ON/OFF delay / One shot / Timer off Delay timer: 1ms to 9999ms (can be set at intervals of 1ms)
Response time	Without load → with load: 1ms, with load → without load: 100ms
Indicator	Operation indicator, setting indicator, NO/NC indicator: orange LED
Display	Operation level display: 4‐digit red LED, threshold indicator: 4-digit green LED
Switch	[SET/TEACHING] button: teaching / setting [UP/DOWN] button: adjust threshold value / select settings
Protection circuit	Power reverse connection / reverse output / output short circuit protection
Sensitivity setting	Maximum sensitivity teaching
Sensitivity adjustment function	Equipped (automatic adjustment / manual adjustment)
Connection method	Cord drawing type (ɸ4.2 mm o.d.) 0.2mm2 x 4-core, 2m (robot cable)
Weight	KSS85 (amplifier): approx. 100 g, KS-100: approx. 4g, KS-15: approx. 1g
Accessory	Instruction manual

Environmental Specification

Ambient temperature	Amplifier: -25 to +55°C, force sensitive sheet: 0 to +55°C (non-freezing)
Ambient humidity	35 to 85% RH (non-condensing)
Protection structure	IP40
Vibration	10 to 55Hz, double amplitude 1.5mm, X, Y, Z directions, 2 hours each
Shock	500 m/s2, 3 times each in X, Y and Z directions
Dielectric withstand voltage	500VAC for 1min
Insulation resistance	At least 20M Ω with 500VDC Megger