Rating/Performance/Specification

Detection method	Through beam
Detecting distance	50m
Detection object	φ21mm or more Opaque
Power supply	12-24V DC ±10% / Ripple10% or less
Current consumption	Transmitter: 22 mA or less Receiver: 17 mA or less
Output mode	NPN / PNP open collector dual output
Operation mode	Light ON/Dark ON (with control lead)
Light emission stop function	Provided (no-voltage input)
Response time	0.5ms or less
Operating angle	5°(at receiver)
Light source (light wavelength)	Infrared LED (880nm)
Indicator	Transmitter: Power indicator (orange LED) Receiver: Operation indicator (orange LED) Stability indicator (green LED)
Volume(VR)	SENS: sensitivity adjustment (on receiver for through beam type)
Switch	Dark ON / Light ON selector switch
Short circuit protection	Output short circuit protection, protection against reverse connection, surge absorber
Material	Case: Polycarbonate / Lens: acrylic
Connection	Outer dimension: dia. 6mm Transmitter: 0.3 mm2 3 cores 2 m (gray) Receiver: 0.3 mm2 4 cores 2 m (black)
Weight	Approx. 125g (transmitter/receiver)
Accessories	Operation manual (mounting bracket is not included)

• The detecting distance and detection object for retroreflective types varies, depending on reflector types combined with the sensor.
• The detecting distance is the range which you can set for the reflector. The sensor can detect an object even at an extremely short range.
• The detecting distance of the diffuse reflective type varies, depending on transmittance of the detection object. Please be sure to check the detection beforehand.
• * Models without the suffix “-2” are available with reverse pin assignment for PNP and NPN output.
• *1 Some materials do not allow stable detection. Some mirror-like objects wrapped in transparent film, glossy objects, laminated aluminum nameplates, etc., may inherently affect polarization. In such cases, the polarized waves of the sensor may be disturbed, which will cause unstable detection.
• *2 Detecting objects with a higher transmission may offer shorter detection distances.

Environmental Specification

Ambient light	5,000 lx or less
Ambient temperature	–25 - +55°C (storage: -40- +70℃) (non-freezing)
Ambient humidity	35-85%RH (non-condensing)
Protective structure	IP67
Vibration	10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
Shock	100 m/s2 / 3 times each in 3 directions
Dielectric withstanding	1,000 VAC for 1 minute
Insulation resistance	500 VDC, 20 MΩ or higher