| Detection method | Polarized retro-reflective type |
|---|---|
| Detection distance | 0.03 to 1.5m (using K-71 reflector) |
| Detection object | Glossy object including mirror- like materials and stainless-steel plates or opaque objects |
| Power supply | 12 to 24VDC ±10% Ripple 10% or less |
| Current consumption | 35mA or less |
| Output mode | Control output：PNP open collector output Rating: Source current 100mA (30VDC) or less Residual voltage 1V or less Stability output：PNP open collector output Rating: Source current 50mA (30VDC) or less Residual voltage 1V or less |
| Operation mode | Light on/Dark on selectable operation (with switch) |
| Response time | 0.5ms or less |
| Operating angle | 30° (at reflector) |
| Light source (light wavelength) | Red LED (Wavelength of transmission: 700nm) |
| Indicators | Operation indicator (red LED) Stability indicator (green LED) |
| Volume | SENS: Sensitivity adjustment (on receiver for through-beam type) |
| Switch | Light on/dark on selection switch provided |
| Material | Case: Polyarylate Lens: Acrylic |
| Connection | M8 connector type |
| Mass | Approx. 25g |
| Accessories | Operation manual, adjustment driver, mounting bracket and K-71 reflector |
| Ambient light | 5,000 l x or less |
|---|---|
| Ambient temperature | −25 to ＋55℃ (with no freezing) During storage : −40 to ＋70℃ |
| Ambient humidity | 35 to 85%RH (with no condensation) |
| Protective structure | ＩＰ67 |
| Vibration | 10 to 55Hz double-amplitude 1.5 2 hours each in 3 directions |
| Dielectric withstanding | 1000VAC for one minute |
| Insulation resistance | 20MΩ or more when tested with 500VDC megger |
| Shock | 500m/s2 3 times each in 3 directions |