Specification

Detection method	Identification of color ratios through R/G/B light receptive elements
Detection distance	Depends on the use environment
Standard detection target	Light source emitting visible lights
Power Supply	12 to 24 V DC ±10%, Ripple 10% or less
Current consumption	1000mW or less (40mA or less) at 24V DC
Reference color registration	Via teaching: 1 color (for Mode 1) Via teaching: 3 colors (for Mode 3)
Reference color setting	1-point teaching / 2-point teaching
External input/output	1 input, 1 output (for Mode 1), 3 outputs (for Mode 3)
External teaching input	No-voltage input (With or without contact point) (only for Mode 1)
Output mode	NPN/PNP open collector output (operation switch) Load current: 50mA (30V DC) or less, Residual voltage: 2V or less
Operation mode	Switch “Match ON”/“Match OFF”with the reference color
Timer	ON Delay / OFF Delay / One Shot / No timer Delay time: 1 to 999 ms (setting available in an interval of 1ms)
Response time	Auto (10 ms or less at maximum, depending on the illumination conditions of the workpiece) / 50 ms or less / 100 ms or less / 250 ms or less / 500 ms or less (selectable)
Indicators	Operation indicator, Setting indicator,Match ON (NO) and Match OFF (NC) Indicator: Orange LED
Display	Tolerance value display: Green LED, 4-digit/ Maximum difference display of color ratios: Red LED, 4-digit
Protection circuit	Protection against power reversed connection and output short-circuit
Material	Polycarbonate
Connection method	Attached cable type (φ4.2 mm2 o.d.) 0.2 mm2 x 5-core, 2m
Accessories	Instruction manual

Environmental Specification

Ambient temperature	-25 to +55℃ at storage (no freezing)
Ambient humidity	30 to 85 % RH (no condensation)
Protection structure	IP40
Anti-vibration	10 to 55 Hz, double amplitude 1.5 ㎜, X, Y, Z directions, 2 hour each
Shock	500m/s2, 3 times each in X, Y and Z directions
Dielectric withstand voltage	1000V AC for 1 minute
Insulation resistance	20MΩ or more with 500V DC Megger