| Detection method | Through beam |
|---|---|
| Detecting distance | 150 mm |
| Detection object | dia.3mm (or more) Opaque |
| Power supply | 24VDC±10% / Ripple 10% or less *1 |
| Current consumption | Transmitter : 15mA or less Receiver : 22mA or less |
| Output mode | PNP open collector Rating: source current 80mA (30 VDC) or less |
| Operation mode | (See the Type table in the previous page) |
| Response time | 0.5ms or less |
| Light source | Red LED |
| Indicator | Transmitter: - Receiver: Operation indicator (orange LED), Stability indicator (green LED) |
| Sensitivity adjustment *2 | in-line volume |
| Material | Case : ABS resin Lens : PMMA |
| Connection | Attached cable 2m Transmitter：0.15mm2×2 core (Gray), dia φ2.5mm Receiver：0.15mm2×3core (Black), dia φ2.7mm |
| Accessory | Instruction manual, screws(M2.6×10mm), nuts, washers and a screwdriver for adjustnent |
| Weight | Transmitter : Approx. 30g Receiver : Approx. 40g |
| Notes | * Standard detection object: 50x50 white drawing paper *1 12 VDC type also available. PNP output type models identified by “P” at the end of model number. Comes with output conversion unit. |
| Ambient light | 3,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) |
| Ambient humidity | 35 - 85%RH (non-condensing) |
| Protective structure | IP67 |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Dielectric withstanding | AC 1000V for 1 or more |
| Insulation resistance | 500VDC, 20 MΩ or higher |
| Shock | 500 m/s2 / 3 times each in 3 directions |