Detection method | Through beam |
---|---|
Detecting distance | 500mm |
Detection object | dia.3mm (or more) Opaque |
Power supply | 24VDC±10% / Ripple 10% or less *1 |
Current consumption | Transmitter : 15mA or less Receiver : 15mA or less |
Output mode | NPN open collector Rating: sink current 80mA (30 VDC) or less |
Operation mode | (See the Type table in the previous page) |
Response time | 0.5ms or less |
Light source | Red LED |
Indicator | Transmitter: - Receiver: Operation indicator (orange LED), Stability indicator (green LED) |
Material | Case : ABS resin Lens : PMMA |
Connection | Attached cable 2m Transmitter:0.15mm2×2 core (Gray), dia φ2.5mm Receiver:0.15mm2×3core (Black), diaφ2.7mm |
Accessory | Instruction manual, screws(M2.6×12mm), nuts, washers and a screwdriver for adjustnent |
Weight | Transmitter : Approx. 30g Receiver : Approx. 30g |
Notes | * Standard detection object: 50x50 white drawing paper *1 12 VDC type also available. PNP output type models identified by “P” at the end of model number. Comes with output conversion unit. |
Ambient light | 3,000 lx or less |
---|---|
Ambient temperature | -25 - +55 ℃ (non-freezing) |
Ambient humidity | 35 - 85%RH (non-condensing) |
Protective structure | IP67 |
Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
Dielectric withstanding | AC 1000V for 1 or more |
Insulation resistance | 500VDC, 20 MΩ or higher |
Shock | 500 m/s2 / 3 times each in 3 directions |