| Detection method | Diffuse reflective |
|---|---|
| Detecting distance | 2 to 50mm* |
| Power supply | 12 to 24VDC±10% / Ripple 10% or less |
| Current consumption | 30mA or less |
| Output mode | PNP open collector Rating: source current 80mA (30 VDC) or less |
| Operation mode | (See the Type table in the previous page) |
| Response time | 0.5ms or less |
| Hysteresis | 10% or less of detection distance |
| Light source | Red LED |
| Indicator | Operation indicator (orange LED), Stability indicator (green LED) |
| Sensitivity adjustment *2 | in-line volume |
| Material | Case : ABS resin Lens : PMMA resin |
| Connection | Attached cable (dia. 2.8) 0.15 mm2 x 3 cores 2m (black) |
| Accessory | Mounting screws, washers, nuts (material: Fe), screwdriver for adjustment (provided for models with adjustment volume only), instruction manual |
| Weight | Approx. 30g |
| Notes | * Standard detection object: 50x50 white drawing paper *1 12 VDC type also available. PNP output type models identified by “P” at the end of model number. Comes with output conversion unit. |
| Ambient light | 3,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) |
| Ambient humidity | 35 - 85%RH (non-condensing) |
| Protective structure | IP67 |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Dielectric withstanding | AC 1000V for 1 or more |
| Insulation resistance | 500VDC, 20 MΩ or higher |
| Shock | 500 m/s2 / 3 times each in 3 directions |