Detection method | Convergent reflective |
---|---|
Detecting distance | 5 to 30mm |
Power supply | 12 to 24VDC±10% / Ripple 10% or less |
Current consumption | 30mA or less |
Output mode | NPN open collector Rating: sink current 80mA (30 VDC) or less |
Operation mode | (See the Type table in the previous page) |
Response time | 0.5ms or less |
Hysteresis | Up to 10% of detecting distance |
Light source | Red LED |
Indicator | Operation indicator (orange LED), Stability indicator (green LED) |
Sensitivity adjustment *2 | in-line volume |
Circuit protection | Provided |
Material | Case : ABS resin Lens : PMMA resin |
Connection | Attached cable (dia. 2.8) 0.15 mm2 x 3 cores 2m (black) |
Accessory | Mounting screws, washers, nuts (material: Fe), screwdriver for adjustment (provided for models with adjustment volume only), instruction manual |
Weight | Approx. 40g |
Accessory | Instruction manual, screws(M2.6×12mm), nuts, washers and a screwdriver |
Notes | * Standard detection object: 50x50 white drawing paper *1 12 VDC type also available. PNP output type models identified by “P” at the end of model number. Comes with output conversion unit. |
Ambient light | 3,000 lx or less |
---|---|
Ambient temperature | -25 - +55 ℃ (non-freezing) |
Ambient humidity | 35 - 85%RH (non-condensing) |
Protective structure | IP67 |
Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
Dielectric withstanding | AC 1000V for 1 or more |
Insulation resistance | 500VDC, 20 MΩ or higher |
Shock | 500 m/s2 / 3 times each in 3 directions |