| Detection method | Diffuse reflective |
|---|---|
| Detecting distance | 400mm (200 x 200 mm white drawing paper) |
| Detection object | Opaque, translucent, and transparent |
| Power supply | 12-24V DC±10% / Ripple 10% or less |
| Current consumption | 25mA or less |
| Output mode | NPN open collector Rating: sink current 100mA (30 VDC) or less /Residual voltage: 1 V or less |
| Operation mode | Light-ON / Dark-ON selectable (with switch) |
| Mutual interference prevention function | Provided (up to 2 sensors) |
| Response time | 0.5ms or less |
| Hysteresis | Up to 10% of detecting distance |
| Light source (light wavelength) | Red LED (640nm) |
| Indicator | Operation indicator (orange LED), Stability indicator (green LED) |
| Volume (VR) | Sensitivity adjustment (on receiver for through beam type) |
| Switch (SW) | Light-ON / Dark-ON selector switch |
| Short circuit protection | Provided |
| Material | Case : Polybutylene terephthalate Lens : Methacrylate |
| Connection | Attached cable (dia. 3.5mm) 0.2 mm2 x 3 cores 2m (black) |
| Weight | Approx. 60g |
| Accessory | Mounting screws, instruction manual (mounting bracket separately available) |
- The detecting distance and detection object of retroreflective types varies, depending ON reflector types combined with The sensor. The detecting distance is The range which you can set for The reflector. The sensor can detect an object even in extremely short range. - The detecting distance of diffuse reflective type varies, depending ON transmittance of The detection object. Please be sure to check The detection beforehand.
| Ambient light | 5,000 lx or more |
|---|---|
| Ambient temperature | -25 - +55℃ (non-freezing)/Storage -30- +70℃ |
| Ambient humidity | 35 - 85%RH (non-condensing) |
| Protective structure | IP67 |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Dielectric strength | AC1000V 1 or more |
| Insulation resistance | 500 VDC, 20 MΩ or higher |
| Shock | 500 m/s2 / 3 times each in 3 directions |