| Detection method | Through beam |
|---|---|
| Detecting distance | 7m |
| Detection object | dia.6mm (or more) Opaque |
| Power supply | 12-24V DC±10% / Ripple 10% or less |
| Current consumption | Transmitter: 22mA or less Receiver: 15mA or less |
| Output mode | NPN open collector Rating: sink current 100mA (30 VDC) or less /Residual voltage: 1 V or less |
| Operation mode | Light-ON / Dark-ON selectable (with switch) |
| Response time | 0.5ms or less |
| Operating angle | 10° (at receiver) |
| Light source (light wavelength) | Infrared LED (880nm) |
| Indicator | Transmitter: Power indicator (orange LED) Receiver: Operation indicator (orange LED), Stability indicator (green LED) |
| Volume (VR) | Sensitivity adjustment (on receiver for through beam type) |
| Switch (SW) | Light-ON / Dark-ON selector switch |
| Short circuit protection | Provided |
| Material | Case : Polybutylene terephthalate Lens : Methacrylate |
| Connection | M8 connector (cable with M8 connector separately available) |
| Weight | Transmitter / receiver: approx. 10g |
| Accessory | Mounting screws, instruction manual (mounting bracket separately available) |
| Ambient light | 5,000 lx or more |
|---|---|
| Ambient temperature | -25 - +55℃ (non-freezing)/Storage -30- +70℃ |
| Ambient humidity | 35 - 85%RH (non-condensing) |
| Protective structure | IP67 |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Dielectric strength | AC1000V 1 or more |
| Insulation resistance | 500 VDC, 20 MΩ or higher |
| Shock | 500 m/s2 / 3 times each in 3 directions |