| Detection method | Polarized retroreflective |
|---|---|
| Detecting distance | 0.03-1.3m |
| Detection object | Glossy objects including mirrorlike materials and stainlesssteel plates or opaques |
| Power supply | 12-24V DC±10% / Ripple 10% or less |
| Current consumption | 25mA or less |
| Output mode | PNP open collector Rating: source current 100mA (30 VDC) or less /Residual voltage: 2 V or less |
| Operation mode | Light-ON / Dark-ON selectable (with switch) |
| Mutual interference prevention function | Provided (up to 2 sensors) |
| Response time | 0.5ms or less |
| Operating angle | 30° (at reflector) |
| Light source (light wavelength) | Red LED (630nm) |
| Indicator | Operation indicator (orange LED), Stability indicator (green LED) |
| Volume (VR) | Sensitivity adjustment (on receiver for through beam type) |
| Switch (SW) | Light-ON / Dark-ON selector switch |
| Short circuit protection | Provided |
| Material | Case : Polybutylene terephthalate Lens : Methacrylate |
| Connection | M8 connector (cable with M8 connector separately available) |
| Weight | Approx. 10g |
| Accessory | Mounting screws, instruction manual (mounting bracket separately available), K-71 reflector |
| Ambient light | 5,000 lx or more |
|---|---|
| Ambient temperature | -25 - +55℃ (non-freezing)/Storage -30- +70℃ |
| Ambient humidity | 35 - 85%RH (non-condensing) |
| Protective structure | IP67 |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Dielectric strength | AC1000V 1 or more |
| Insulation resistance | 500 VDC, 20 MΩ or higher |
| Shock | 500 m/s2 / 3 times each in 3 directions |