UM-T50DSP

Rating/Performance/Specification

Detection method Through beam
Detecting distance 500 mm
Detection object dia.3mm (or more) Opaque
Power supply 24VDC±10% / Ripple 10% or less
Current consumption Transmitter : 15mA or less
Receiver : 22mA or less
Output mode PNP open collector
Rating: source current 80mA (30 VDC) or less
Operation mode (See the Type table in the previous page)
Response time 0.5ms or less
Light source Red LED
Indicator Transmitter: -
Receiver: Operation indicator (red LED), Stability indicator (green LED)
Material Case : Liquid crystalline polyester (filler: polypropylene)
Lens : PMMA
Connection Attached cable 2m Transmitter:0.15mm2×2 core (Gray), dia φ2.5mm
Receiver:0.15mm2×3core (Black), dia φ2.7mm
Weight Transmitter : Approx. 30g
Receiver : Approx. 30g
Notes * The distance between the sensor and the in-line volume for sensitivity adjustment is fixed to 300mm.
Accessory Instruction manual, screws(M12×10mm), nuts, washers and a screwdriver for adjustment (for models which model number ends with "V")

Environmental Specification

Ambient light 3,000 lx or less
Ambient temperature -25 - +55 ℃ (non-freezing)
Ambient humidity 35-85%RH (non-condensing)
Protective structure IP64
Vibration 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
Sock 500m/S2 3 times each in 3 directions
Dielectric withstanding 1000VAC 1minuts
Insulation resistance DC500V Megger 20MΩ or higher