Detection method | Diffuse reflective |
---|---|
Detecting distance | 2 to 30mm (50x50mm white drawing paper) |
Detection object | Opaque, translucent, transparent |
Power supply | 12 to 24V DC±10% / Ripple 10% or less |
Current consumption | 20mA or less |
Output mode | NPN open collector Rating: sink current 80mA (30 VDC) or less |
Operation mode | (See the Type table in the previous page) |
Response time | 0.5ms or less |
Hysteresis | Up to 10% of detecting distance |
Light source | Red LED |
Indicator | Operation indicator (red LED), Stability indicator (green LED) |
Material | Case : Liquid crystalline polyester (filler: polypropylene) Lens : PMMA |
Connection | Attached cable 2m 0.15mm2×3core (Black), dia φ2.7mm |
Weight | Approx. 30g |
Notes | * The distance between the sensor and the in-line volume for sensitivity adjustment is fixed to 300mm. |
Accessory | Instruction manual, screws(M12×10mm), nuts, washers and a screwdriver for adjustment (for models which model number ends with "V") |
Ambient light | 3,000 lx or less |
---|---|
Ambient temperature | -25 - +55 ℃ (non-freezing) |
Ambient humidity | 35-85%RH (non-condensing) |
Protective structure | IP64 |
Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
Sock | 500m/S2 3 times each in 3 directions |
Dielectric withstanding | 1000VAC 1minuts |
Insulation resistance | DC500V Megger 20MΩ or higher |