Rating/Performance/Specification

Detection method	Through beam
Detecting distance	7 m
Detection object	dia.20mm (or more) Opaque
Power supply	12 - 24V DC ±10% / Ripple 10% or less (* 5VDC model)
Current consumption	Transmitter: 20mA or less Receiver: 25mA or less
Output mode	Control output : PNP open collector output Rating: source current 100mA (30 VDC) or less / Residual voltage: 2 V or less Stability output : NPN open collector output Rating: sink current 50mA (30 VDC) or less / Residual voltage: 1 V or less
Operation mode	Light-ON/Dark-ON selectable (with switch)
Response time	0.5ms or less
Operating angle	10° (at receiver)
Light source (light wavelength)	Red LED (700nm)
Indicator	Transmitter: power indicator (red LED) Receiver: operation indicator (red LED) stability indicator (green LED)
Volume(VR)	SENS: sensitivity adjustment (on receiver for through-beam type)
Switch(SW)	Light-ON/Dark-ON selector switch provided
Short circuit protection	Provided (for control output only)
Material	Case : Polyarylate Lens : Acrylic
Connection	Connector type
Mass	Approx. 80 g (transmitter/receiver)
Accessories	Mounting bracket, screwdriver for adjustment and operation manual
Notes	*A model using power supply of 5VDC is also available among head-on types. Please contact TAKEX for details. * All models are provided with a mounting bracket. Polarization reflector types are provided with a bracket for reflector and adhesive sheet for mounting the reflector.

• The detecting distance of diffuse reflective type varies, depending on transmittance of the detection object. Please be sure to check the detection beforehand.
• The detecting distance and detection object of the reflective type vary, depending on a reflector combined with the sensor.
• The detecting distance is the range which you can set for the reflector. The sensor can detect an object even in extremely short range.

Environmental Specification

Ambient light	5,000 lx or less
Ambient temperature	-25 - +55 ℃ (non-freezing)
Ambient humidity	35-85%RH (non-condensing)
Protective structure	IP67
Vibration	10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
Shock	500 m/s2 / 3 times each in 3 directions
Dielectric withstanding	1,000 VAC for 1 minute
Insulation resistance	500 VDC, 20 MΩ or higher