Detection method | Polarized retroreflective |
---|---|
Detecting distance | 0.03 - 1.5 m |
Detection object | Glossy objects including mirror-like materials and stainless-steel plates or opaque objects |
Power supply | 12 - 24V DC ±10% / Ripple 10% or less (* 5VDC model) |
Current consumption | 30mA or less |
Output mode | Control output : NPN open collector output Rating: sink current 100mA (30 VDC) or less / Residual voltage: 1 V or less Stability output : NPN open collector output Rating: sink current 50mA (30 VDC) or less / Residual voltage: 1 V or less |
Operation mode | Light-ON/Dark-ON selectable (with switch) |
Response time | 0.5ms or less |
Operating angle | 30° (at reflector) |
Light source (light wavelength) | Red LED (700nm) |
Indicator | Operation indicator (red LED) Stability indicator (green LED) |
Volume(VR) | SENS: sensitivity adjustment (on receiver for through-beam type) |
Switch(SW) | Light-ON/Dark-ON selector switch provided |
Short circuit protection | Provided (for control output only) |
Material | Case : Polyarylate Lens : Acrylic |
Connection | Connector type |
Mass | Approx. 80g |
Accessories | Mounting bracket, screwdriver for adjustment, K-71 reflector and operation manual |
Notes | *A model using power supply of 5VDC is also available among head-on types. Please contact TAKEX for details. * All models are provided with a mounting bracket. Polarization reflector types are provided with a bracket for reflector and adhesive sheet for mounting the reflector. |
Ambient light | 5,000 lx or less |
---|---|
Ambient temperature | -25 - +55 ℃ (non-freezing) |
Ambient humidity | 35-85%RH (non-condensing) |
Protective structure | IP67 |
Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
Shock | 500 m/s2 / 3 times each in 3 directions |
Dielectric withstanding | 1,000 VAC for 1 minute |
Insulation resistance | 500 VDC, 20 MΩ or higher |