GSR05RSPNN-J

Rating/Performance/Specification

Detection method Diffuse reflective type
Detecting distance 500mm
(100 x 100mm white drawing paper)
Detection object Opaque, translucent, and transparent
Power supply 12 - 24V DC ±10% / Ripple 10% or less (* 5VDC model)
Current consumption 35mA or less
Output mode Control output : PNP open collector output Rating: source current 100mA (30 VDC) or less / Residual voltage: 2 V or less
Stability output : NPN open collector output Rating: sink current 50mA (30 VDC) or less / Residual voltage: 1 V or less
Operation mode Light-ON/Dark-ON selectable (with switch)
Response time 0.5ms or less
Hysteresis 10% or less
Light source (light wavelength) Red LED (700nm)
Indicator Operation indicator (red LED)
Stability indicator (green LED)
Volume(VR) SENS: sensitivity adjustment (on receiver for through-beam type)
Switch(SW) Light-ON/Dark-ON selector switch provided
Short circuit protection Provided (for control output only)
Material Case : Polyarylate
Lens : Acrylic
Connection Connector type
Mass Approx. 80g
Accessories Mounting bracket, screwdriver for adjustment and operation manual
Notes *A model using power supply of 5VDC is also available among head-on types. Please contact TAKEX for details.
* All models are provided with a mounting bracket. Polarization reflector types are provided
with a bracket for reflector and adhesive sheet for mounting the reflector.

Environmental Specification

Ambient light 5,000 lx or less
Ambient temperature -25 - +55 ℃ (non-freezing)
Ambient humidity 35-85%RH (non-condensing)
Protective structure IP67
Vibration 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
Shock 500 m/s2 / 3 times each in 3 directions
Dielectric withstanding 1,000 VAC for 1 minute
Insulation resistance 500 VDC, 20 MΩ or higher