GR12RSN

Rating/Performance/Specification

Detection method Convergent reflective
Detection distance 12mm ± 2mm
Power source 12 - 24 VDC ±10% / Ripple: 10 % or less
Current consumption 35mA or less
Output mode NPN open collector output Rating: sink current 100 mV (30 VDC) or less
Operation mode Light ON / Dark ON selectable (with switch)
Anti Interference feature Available (up to two units)
Spot diameter dia.1mm
Smallest detectable mark width 0.5 mm
(green mark on white background)
Response time 0.5 ms or less
Light source (Light wavelength) Red LED(660nm)
Volume (VR) 4 turn sensitivity adjustment without stopper provided
Indicator Light reception indicator (Red LED)
Stability indicator (Green LED)
Short circuit protection Provided
Material Case:Polyarylate Lens:Polycarbonate (lens of GR12UVS: glass)
Connection Cable type (outer diameter: dia.4.2mm) 0.3 mm2 x 3 cores, 2 m
Weight Approx.80 g
Notes *1 At detecting distance 40 mm.
*2 (Note)Do not look straight into the light source while illuminated. The strong UV ray may damage the eye if
seen only for a short time. If it is unavoidably necessary to look, be sure to use glasses, etc. with UV
protection.
Accessory Screwdriver for adjustment, mounting bracket, operation manual

Environmental Specification

Ambient light 3,000 lx or less
Ambient temperature -25 - +55 ℃ (non-freezing) Storage: -30 - +70 ℃
Ambient humidity 35-85%RH (non-condensing)
Protective structure IP67
Vibration 10-55 Hz / 1.5 mm ddouble amplitude / 2 hours each in 3 direction
Shock 1000 m/s2 / 2 times each in 3 directions