| Detection method | U-shaped through beam |
|---|---|
| Detection interval | 2 mm fixed |
| Power source | 12 - 24 VDC ±10% / Ripple: 10 % or less |
| Current consumption | 28mA or less |
| Output mode | NPN open collector output Rating: Sink current 100 mA (30 VDC) or less |
| Operation mode | Light ON/Dark ON selectable (with switch) |
| Response time | 0.5 ms or less |
| Light source (Light wavelength) | Green LED (525nm) |
| Indicator | OPL: Operation indicator (Red LED), STB: Stability indicator (Green LED) |
| Volume (VR) | SENS: 4 turn sensitivity adjustment without stopper provided |
| Switch (SW) | *Light ON/Dark ON selector switch provided L: Light ON, D: Dark ON *Emission intensity selector switch provided L: low powered, H: high powered |
| Short circuit protection | Provided |
| Material | Case: heat resistant ABS, Lens: Glass |
| Connection | Cable type (outer diameter: dia.4mm) 0.2 mm2 x 3 cores, 3 m, black |
| Weight | Approx. 120 g or less |
| Accessory | Screwdriver for adjustment, operation manual |
| Ambient light | 5,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) |
| Ambient humidity | 35-85%RH (non-condensing) |
| Protective structure | IP67 |
| Vibration | 10-55 Hz / 1.5 mm amplitude / 2 hours each in 3 direction |
| Shock | 100 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | 500 VAC for 1 minute |
| Insulation resistance | 500 VDC, 20 MΩ or higher |