| Detection method | Polarized retroreflective |
|---|---|
| Detecting distance | Depending on reflectors(Reflectors are optional) |
| Power source | 12-24VDC ±10% / Ripple 10% or less |
| Current consumption | 30mA or less *1 |
| Output mode | NPN open collector Rating: sink current 100 mA (30 VDC) or less Residual voltage: 1 V or less |
| Operation mode | Light ON/Dark ON selectable (with switch) |
| Cross talk prevention | Built-in(up to 2 sensors) |
| Test input | Non voltage input(Contact or Non contact) |
| Response time | 0.5ms or less |
| Spot diameter | dia.3mm (detecting distance at 3m) |
| Light source (Light wavelength) | Red semiconductor laser (650nm) Class 1 |
| Indicator | Operation indicator (orange LED) / Stability indicator (green LED) |
| Volume (VR) | SENS: sensitivity adjustment |
| Switch (SW) | Dark ON / Light ON selector switch |
| Short circuit protection | Provided |
| Material | Case : Heat resistant ABS Lens : Glass |
| Connection | Cable type (outer dimension: dia. 4 mm) 0.2 mm2 4 cores 2 m (black) |
| Weight | Approx. 80g |
| Accessory | Screwdriver for adjustment, mounting bracket, operation manual, warning label *2, instruction label |
The detecting distance and detection object of retroreflective types varies, depending on reflector types combined with the sensor. The detecting distance is the range which you can set for the reflector. The sensor can detect an object even in extremely short range. *1 The laser diode is equipped with a circuit that maintains the same light intensity level by increasing the current if it becomes dark. For this reason, allow sufficient margin in the capacity of the power supply. *2 Excepting LD-MX5RC1 and LD-MX5RPN-C1.
| Ambient light | 5000 lx or less |
|---|---|
| Ambient temperature | -10 - +55 ℃ (non-freezing) |
| Ambient humidity | 35~85%RH (non-condensation) |
| Protective structure | IP66 |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | 1000 VAC for 1 minute |
| Insulation resistance | 500 VDC 20 MΩ or higher |