Detection method | Variable focus reflective |
---|---|
Detecting distance | 30 - 300 mm (10 x 10 mm white drawing paper) *2 |
Spot variable range | 80 mm - 300mm *2 |
Power supply | 12 to 24VDC ±10% / Ripple 10% or less. |
Current consumption | 35 mA or less *1 |
Output mode | NPN open collector Rating: Sink current 100 mA (30 VDC) or less Residual voltage: 1 V or less |
Operation mode | Light ON/Dark ON selectable (with switch) |
Cross talk prevention | Built-in(Up to 2 sensors) |
Test input | No voltage input(Contact or Non contact) |
Response time | 0.5ms or less |
Spot diameter | dia.1mm(adjustable range: 80 - 300 mm from light receiving surface) |
Smallest detectable mark width | 1 mm (black mark on white background) at 300 mm |
Light source (Light wavelength) | Red semiconductor laser (650 nm) Class 2 |
Indicator | Operation indicator (orange LED) / Stability indicator (green LED) |
Volume (VR) | SENS: sensitivity adjustment (at receiver) |
Switch (SW) | Dark ON / Light ON selector switch |
Short circuit protection | Provided |
Connection | Cable type (outer dimension: dia. 4 mm) 0.2 mm2 4 cores 2 m (black) |
Material | Case:Heat resistant ABS Transmitter lens:Glass Transmitter hood:Aluminum Receiver lens:Acrylic |
Weight | Approx. 80g |
Accessory | Operation manual, Mounting bracket, Screwdriver for adjustment, warning label, instruction label |
l The detecting distance and detection object of the reflector type varies, depending on the reflector you are using. The detecting distance is the range which you can set for the reflector. The sensor can detect an object even in extremely short range. *1 The laser diode is equipped with a circuit that maintains the same light intensity level by increasing the current if it becomes dark. For this reason, allow sufficient margin in the capacity of the power supply. *2 The distance from the receiving lens of the sensor. *3 The reflector is not provided with the product; it is an optional part.
Ambient light | 5000 lx or less |
---|---|
Ambient temperature | -10 - +55 ℃ (no freezing) |
Ambient humidity | 35~85%RH (no condensation) |
Protective structure | IP66 |
Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
Shock | 300 m/s2 / 3 times each in 3 directions |
Dielectric withstanding | 1000 VAC for 1 minute |
Insulation resistance | 500 VDC 20 MΩ or higher |