| Detection method | Through beam |
|---|---|
| Detecting distance | 3m |
| Detection object | dia.20mm (Min.) Opaque |
| Power supply | 12-24VDC ±10% / Ripple 10% or less |
| Current consumption | Transmitter: 12 mA or less Receiver: 15 mA or less |
| Operation mode | Dark ON |
| Output mode | NPN open collector output Sink current 100 mA, 30 V DC or less |
| Response time | 0.35ms or less |
| Operating angle | 10° (at receiver) |
| Light source (Light wavelength) | Infrared LED (880 nm) |
| Indicator | Transmitter: power indicator (red LED) Receiver: operation indicator (red LED) Stability indicator (green LED) |
| Volume (VR) | Not provided (optional: sensitivity adjustable with external volume) |
| Short circuit protection | Provided |
| Material | Case :PFA (fluoroplastic) |
| Connection | Attached cable 3m (outer dimension: dia. 5mm) (2 m protected with PFA tube) Transmitter: 0.15 mm2 2 cores Receiver: 0.15 mm2 4 cores |
| Weight | Approx.100 g (transmitter/receiver) |
| Accessory | Operation manual |
| Ambient light | 5,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing/ non-condensing) |
| Protective structure | IP 67 oilproot (sensor body and cable up to 2 m from body) |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | 1,000 VAC for 1 minute |
| Insulation resistance | 500 VDC, 20 MΩ or higher |