Detection method | Through beam |
---|---|
Detecting distance | 10m |
Detection object | Opaque object of dia.20 min. |
Power supply | AC/DC24-240V ±10% 50/60Hz |
Power consumption | Transmitter: 1.5 W or less Receiver: 2 W or less |
Output mode | Relay output 1c / Rating: 1 A (250 VAC max. resistance load 30 VDC max. resistance load) (*2) (*3) |
Operation mode | Dark ON |
Response time | 5ms or less |
Operating angle | 3% (at receiver) |
Light source (wavelength) | Red LED (700 nm) |
Indicator | (Receiver) Operation indicator (red LED) / Stability indicator (green LED) |
Material | Lens: acrylic / Case: heat resistant ABS |
Connection (*3) | Attached cable (Outer dimension: dia.6mm) Transmitter: 0.3 mm2 x 2 cores, 2 m, gray Receiver: 0.3 mm2 x 5 cores, 2 m, black |
Weight | Transmitter: Approx.150 g / Receiver: Approx.150 g |
Notes | (*1) When used with K-7 reflector provided (*2) Sensors with high-speed, long-life photo-MOS relay (1a) are available on request (Contact Takex for details). (*3) The cable length including connector for attached cable type (-J type) is 300 mm. Optional cable with connector is available. The output of a sensor with attached cable with connector (-J type) is 1a. Sensors of this series are not provided |
Ambient light | 10,000 lx or less |
---|---|
Ambient temperature | -25 - +55 ℃ (non-freezing) |
Ambient humidity | 35-85%RH (non-condensing) |
Protective structure | IP66 |
Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
Shock | 500 m/s2 / 3 times each in 3 directions |
Dielectric withstanding | 1,500 VAC for 1 minute |
Insulation resistance | 500 VDC, 100 MΩor higher |